Call Us: 954-371-1370 Email: info@powerfenceinc.com 902 SW 2nd Place, Pompano Beach, FL 33069
Licensed & Insured - Broward Lic. 20-F-21831-X
Palm Beach Lic. U-22529

Oakland Park - Broward County

Oakland Park
Fence Company

From established family neighborhoods and waterfront properties to pool enclosures, fence replacements, custom gates and HOA projects — Power Fence helps Oakland Park homeowners navigate the process from estimate to final inspection.

Get My Free Estimate View Our Projects
20+ yrsServing South Florida
500+Five-star reviews
Licensed & InsuredBroward + Palm Beach

Before you install

What homeowners should know before installing a fence in Oakland Park.

Oakland Park fence rules vary by where the fence sits, what it faces, and whether the property touches a right-of-way, a waterway or a sight triangle. Here's how the rules actually work, in plain English, with the dimensions that matter when we plan a project — from heights and front-yard visibility to corner sight triangles, landscape setbacks, waterfront easements and vehicle screening.

01

Oakland Park fence height rules

Oakland Park ties fence height to where the fence sits on the lot — and to what type of property is on the other side of the line. Front, side and rear yard each have their own ceiling, plus a higher allowance when the property next door is commercial, industrial or multifamily.

Fence height depends on where the fence is located and what type of property is next door.
  • Front yard — 5′ maximum
  • Side & rear yard — 6′-6″ maximum
  • Adjacent to commercial / industrial / multifamily — 8′ maximum
Fig. 01 — Residential lot, top-down view
02

Front yard setback rules

Even when a fence is allowed in a yard, it isn't always allowed up to the property line. Oakland Park's front yard setback pushes most residential fences well back from the street, and narrow R-1 lots have an even deeper setback.

Fence placement is not always determined by the property line alone.
  • 25′ standard front yard setback
  • 35′ setback on certain 40′-wide R-1 lots
  • Verified against the survey before submittal
Fig. 02 — Front yard setback, top-down view
03

Driveway sight triangle

Driveway visibility triangles keep sightlines clear where a vehicle enters or exits the property. Fences (and hedges) inside that triangle have to stay low enough for drivers to see oncoming traffic and pedestrians.

A full-height fence may not be permitted near driveways.
  • 20′ visibility triangle at the driveway
  • 36″ maximum fence height inside the triangle
  • Applies on both sides of the driveway
Fig. 03 — Driveway visibility, top-down view
04

Corner lot visibility triangle

Corner properties pick up an additional 30-foot visibility triangle at the intersection — bigger than a driveway triangle because two streets meet, and the sightlines extend farther.

Corner lots often require additional planning before installation.
  • 30′ visibility triangle at the intersection
  • 36″ maximum fence height inside the triangle
  • Applies at both legs of the corner
Fig. 04 — Corner lot sight triangle, top-down view
05

Pool barrier requirements

Pool barrier rules are inspected separately from a standard fence. The barrier itself, the gate, the gate hardware and the latch placement are all reviewed against the pool-barrier code, not just the height ordinance.

Pool inspections focus on gate hardware and safety details, not just fence height.
  • Self-closing gate
  • Self-latching gate
  • 54″ minimum latch height above the bottom of the gate
Fig. 05 — Pool barrier & gate, elevation view
06

Finished side faces out

Oakland Park requires that the finished, decorative side of the fence faces outward — toward the street and toward neighbors. Posts, rails and structural framing stay on the inside of the property.

Fence orientation is part of code compliance.
  • Finished side faces the street and neighbors
  • Posts & rails face inside your property
  • Orientation reviewed at final inspection
Fig. 06 — Fence orientation, plan view
07

Survey & property line planning

Most permit delays start with the site plan — not the fence itself. Oakland Park wants a recent survey, accurate property lines, and fence placement shown with setbacks, dimensions and any pool, driveway, easement or corner condition that affects the layout.

Most permit delays start with incomplete or inaccurate site plans.
  • Survey required for any fence permit
  • Setbacks must be shown on the plan
  • Fence location & dimensions clearly identified
Fig. 07 — Site plan / survey, top-down view

The short version

Oakland Park
fence rules, at a glance.

The numbers we plan around on every Oakland Park project. Every site is different — these are the typical starting points.

5′Front yard
maximum
6′-6″Side yard
maximum
6′-6″Rear yard
maximum
8′Commercial
adjacency
25′Front yard
setback
35′Narrow lot
setback
20′Driveway
visibility
30′Corner
visibility
36″Fence in
visibility area
54″Pool gate
latch height
Faces OutFinished side faces outward to street and neighbors
Not AllowedBarbed wire, razor wire and electrified wire

Rules can vary based on zoning, easements, HOA requirements, lot configuration and site-specific conditions. Power Fence verifies requirements during the estimate and permit process.

After you sign

What happens next.

From your first estimate to final inspection, every step has a real person attached to it — and we tell you exactly where your project is.

  1. 01 - Estimate & Site Visit

    We visit the property, discuss goals, measure the area and walk corner-lot, driveway, pool and property-line conditions.

  2. 02 - Survey & Documentation

    We review the survey, property lines, setbacks, sight triangles and proposed fence layout.

  3. 03 - HOA & Permit Coordination

    Nikki runs the application through Oakland Park and your HOA so you never deal with the building department directly.

  4. 04 - Approval Complete

    Permits in hand, HOA letter on file, materials ordered and install date scheduled.

  5. 05 - Installation

    Our own crews install — never unlicensed subs. Site is cleaned daily.

  6. 06 - Final Inspection

    We meet the city inspector on-site and close the permit. You get the final paperwork.

  7. 07 - Warranty & Support

    Manufacturer warranties on materials, our own workmanship guarantee and a real number to call.

Meet your project liaison

Nikki

HOA & Permit Coordinator

Nikki runs the back-of-house side of every Oakland Park project — submitting plans to the city, working with HOAs on color and material approvals, coordinating surveys, setback verification and pool-barrier documentation, and scheduling inspections. She's the one keeping your project moving while our crews and you focus on the install itself. If you ever wonder where things stand, she's the person to call.

Good planning before installation

Good fence projects start with good planning.

Most fence problems in Oakland Park aren't problems with the fence — they're problems with the plan. Wrong property lines, missing setbacks, an unchecked driveway triangle, a pool gate that won't pass inspection, mature landscaping in the wrong spot, an easement nobody flagged. We catch these things during the estimate, not at inspection. The goal is a project that goes in once, passes once and lasts as long as you own the house.

  • Property line accuracy
  • Fence placement & setbacks
  • Corner lot & driveway visibility
  • Pool barrier & gate compliance
  • Existing landscaping & replacement work
  • Sight triangles
  • Permit preparation
  • Long-term ownership

Different parts of town, different plans

Oakland Park is not one market.

Five areas we plan around most often. Each one comes with its own conditions — lot configuration, landscaping, redevelopment activity, corner visibility — that shape the project plan well before we talk materials.

North - Established

Coral Heights

  • Established neighborhoods
  • Fence replacement projects
  • Mature property conditions
South - Mature

Lloyd Estates

  • Mature landscaping
  • Pool properties
  • Backyard improvements
East - Family

North Andrews Gardens

  • Family homes
  • Backyard improvement projects
  • Long-term homeownership
Central - Redeveloping

Central Oakland Park

  • Mixed lot configurations
  • Redevelopment projects
  • Replacement & new-construction work
Citywide - Corner

Corner Lot Properties

  • Visibility triangle planning
  • Setback considerations
  • Two-street frontage layouts

Oakland Park project spotlights

Recent jobs.

A representative cross-section of the work we do in Oakland Park — each one with its own constraints, its own approvals, its own outcome.

Replacement
01 - Fence replacement - Coral Heights

Replacing 200′ of wood without losing mature landscaping

Challenge

A 25-year-old wood fence had failed but the homeowner had mature hedges and a citrus tree planted right against the line.

Solution

Tear-out done by hand around root zones, new posts set with adjusted spacing, panels staged to keep the hedge in place.

Outcome

Two-day install. Not a single hedge replaced.

Pool barrier
02 - Pool barrier - Lloyd Estates

Code-compliant pool enclosure with proper gate hardware

Challenge

Existing fence didn't meet current pool barrier requirements; gate hardware was wrong and the latch sat below the 54″ minimum.

Solution

New 48″ aluminum enclosure with self-closing, self-latching gate, latch placed at code-required height for first-pass inspection.

Outcome

Passed pool-barrier inspection on first visit.

Corner lot
03 - Corner lot - Central Oakland Park

30′ visibility triangle held without giving up the yard

Challenge

Two-street corner lot. Owner wanted a full 6′-6″ perimeter fence; the city's 30′ visibility triangle made that impossible at the corner.

Solution

Stepped layout — full-height privacy on the side and rear, 36″ decorative aluminum across the triangle so sightlines stay open.

Outcome

Single submittal, single review pass, both heights approved.

Property line
04 - Property line - North Andrews Gardens

A survey-driven fence on a disputed property line

Challenge

Two neighbors had different ideas about where the line was. The old fence sat on the wrong side of the survey, and a replacement risked making it permanent.

Solution

Updated survey, fence set inside the true line by an inch, post locations photo-documented at install.

Outcome

Clear documentation, no future dispute.

Custom gate
05 - Custom gate - Lloyd Estates

In-house welded aluminum driveway gate

Challenge

Homeowner wanted a custom design to match the home's architectural lines — nothing off-the-shelf would do.

Solution

Fabricated in our own shop, powder-coated, automated with safe-stop sensors and a keypad entry.

Outcome

One-of-one gate, salt-air-rated finish, in service for three years and counting.

HOA community
06 - HOA community - Coral Heights

HOA-spec aluminum across multiple lots

Challenge

HOA required matching color, picket spacing and post caps across several adjoining lots with a tight architectural-review window.

Solution

Full review package submitted with shop drawings, color chips and a mocked-up post cap. Approved in one pass.

Outcome

Coordinated install sequence across all lots. Zero ARC kickbacks.

Fence solutions for Oakland Park

Every material we install.

No "preferred" Oakland Park fence material here — the right answer depends on lot configuration, setbacks, pool-barrier needs, privacy goals, maintenance expectations and budget. We talk through every option and recommend what fits the property.

01

Vinyl Fencing

Explore
02

Aluminum Fencing

Explore
03

Wood Fencing

Explore
04

Chain Link Fencing

Explore
05

Pool Fencing

Explore
06

Custom Gates

Explore
07

Custom Welded Aluminum

Explore
More

Not sure which?

Get a free estimate

Permits & approvals

We help navigate the process.

Permit coordination, surveys, site plans, documentation, HOA approvals, setback and visibility verification, pool-barrier compliance, inspection scheduling and final closeout — handled. You're on the project, not the paperwork.

Nikki

Coordinator

Nikki handles every Oakland Park permit submission and HOA package end to end.

  1. 01

    Property surveys

    If you don't have a recent survey, we coordinate one. Required for any fence permit.

  2. 02

    Site plans

    Drawn to scale, showing fence location, height, materials, gates, setbacks and sight triangles where applicable.

  3. 03

    Permit coordination

    We submit to Oakland Park, respond to comments and chase approvals — you never log into a portal.

  4. 04

    HOA approvals

    Architectural-review packages with color, material and elevation samples your board can sign off on.

  5. 05

    Pool barrier & documentation

    Pool-barrier and gate-hardware details, setback acknowledgements and any narrow-lot exhibits assembled with the application.

  6. 06

    Inspection & closeout

    We meet the inspector on-site, walk the install, close out the permit and send you the final paperwork.

Good to know

Oakland Park
fence questions.

Straight answers to what Oakland Park homeowners ask us before every project. Still wondering something? Just call — we're happy to talk it through.

How tall can a fence be in Oakland Park?

Front yard fences top out at 5′. Side and rear yard fences top out at 6′-6″. Fences adjacent to commercial, industrial or multifamily zoning may be permitted up to 8′.

Do I need a survey?

Yes. A recent survey is required to pull a fence permit in Oakland Park. It establishes property lines, easements, rights-of-way and existing improvements — every input the city wants documented before approving a new fence.

What is the 20-foot driveway visibility triangle?

It's a triangular visibility zone at each side of a driveway extending 20′ into the property. Fences (and hedges) inside that triangle can't exceed 36″ so drivers can see oncoming traffic and pedestrians when entering or exiting.

What is the 30-foot corner visibility triangle?

Corner lots pick up a larger 30′ visibility triangle at the intersection. Fences inside that triangle are limited to 36″ so drivers approaching the corner have a clear sightline both ways.

How close can I install a fence to the street?

Not as close as the property line, in most cases. Oakland Park's standard front yard setback is 25′, and certain narrow 40′-wide R-1 lots require a 35′ setback. We verify against the survey before submitting.

What height can a fence be near a driveway?

Inside the 20′ driveway visibility triangle, fence height is limited to 36″. Outside the triangle the usual yard limit (5′ in front, 6′-6″ in side and rear) applies again.

What are the pool barrier requirements?

Pool barriers are inspected separately from the standard fence. The gate must be self-closing and self-latching, and the latch must be at least 54″ above the bottom of the gate. The barrier itself follows the pool-barrier code, not just the height ordinance.

Why does the gate latch need to be 54 inches high?

To keep the gate out of the easy reach of small children. The 54″ minimum is part of the pool-barrier code and is one of the things inspectors check every visit, alongside self-closing and self-latching operation.

Can I install an 8-foot fence?

Sometimes — but only when the property is adjacent to commercial, industrial or multifamily zoning. In standard residential conditions, the ceiling is 6′-6″ in side and rear yards and 5′ in front.

How long does permitting take?

It varies with Oakland Park's queue, HOA review windows and whether the project needs revisions. Nikki gives you a realistic window up front and keeps you posted at each step rather than promising a date we can't hit.

Have a question we didn't cover?

Get a Free Quote Call 954-371-1370

Ready when you are

Work with a fence company
that understands Oakland Park.

Whether you're replacing an aging fence, planning around a pool, working through property line questions, or navigating permit requirements — Power Fence can guide the process from estimate to final inspection.

Get My Free Estimate Call Power Fence - 954-371-1370Call 954-371-1370